Xbox 360 RROD Repair Services
There are different methods used to repair RROD and most of them temporary fix the problem, and when the RROD returns again that time it make it more worst due to the techniques used to repair it at first place. Before repair its better for you to understand the cause of the problem and what method are used to repair it and which method is the best solution.
Cause
The problem behind the Red Rings (9 times out of 10) has to do with cracks, whiskers, and other issues with the solder balls under all of the BGA chips on the 360 MoBo caused by constant heating/cooling cycles.
Fixed that Don't Work
There are few method which are used by shop keepers across UAE to fix the RROD, and many of you also tried some of them at home after searching on internet or watched those on Youtube but the truth is that "it just make it worst"
The Towel Fix-
People think that by wrapping their 360 in a towel and running it for excessive periods of time, the internal components will reach the melting point of lead-free solder (217C), and the bad joints under the BGAs will reflow, fixing the problem... I'm not even going to explain what's wrong with that picture.
The Penny Fix-
By putting pennies underneath the GPU heatsink/on top of the RAM chips, the extreme pressure on the RAM BGAs will (in some cases) push the chip down enough that the bad joints make connections. Now this is all good and dandy save the fact that neither the solder balls nor the RAM were meant to take that kind of pressure, and this fix will only lead to more broken joints.
The "X-Clamp" Fix-
This fix utilizes the same basic principle as the penny fix. By removing the stock heatsink clamps, you can hold the CPU and GPU heatsinks on with machine screws. The idea is that you can over tighten the bolts causing the heatsinks to exert more pressure on the processors, pressing the broken solder joints down until they make connections. The issue with this is that more pressure inevitably leads to more broken joints... which leads to more pressure, which leads to more broken joints... the vicious cycle continues until you get micro fractures in the chips and your console is dead for good.
The Fix that DOES WORK
Easily the most reliable, and effective fix is performing a reflow. By re-melting the solder balls in a BGA any imperfect joints will be fixed when they re-harden. Now some people claim they can reflow their Xbox using a heat gun or an oven, but to reflow properly you need the proper equipment, and thats what we got and do to Fix the problem.
Service Charges
RROD Repair Charges 225/= AED
Pickup/Drop Courier Charges 60/= AED (Dubai, Sharjah, Al-Ain, Fujerah)
Terms
The success rate of Reflow is about 90%, There might be few chances that RROD can't be fixed due to previous RROD fix attempts or Chip (CPU, GPU, HANA, ANA, Southbridge, Memory) internal damage. Incase if we are unable to Fix Your box, there will be no service charges however courier charges must be paid by Xbox owner by any means.
Warranty
30 Days Money Back Guarantee
Email : Xcitenetwork@live.com
Posts
0 comments:
Post a Comment